Covering all of ever developing needs of the tool designers, tool makers and moulders is a never ending effort we at DME are fully dedicated to. To fulfill our customers’ expectations and needs, we are introducing another major extension of our mould components range.

Covering all of ever developing needs of the tool designers, tool makers and moulders is a never ending effort we are fully dedicated to. To fulfill our customers' expectations and needs, we are introducing another major extension of our mould components range.


Check our novelties in a brand new minicatalogue!


Further extension to our components range

We are excited to announce an addition to our portfolio of Collapsible Cores. The new S-Collapsible Core brings you extended options for designing your mould.

S-Collapsible Cores by DME gives you **an improved design bringing never seen before product performance** to you. This new design provides significantly more space for undercuts between the guide and the outer contour. In addition to this the S-Collapsible Core can be moved completely to the end of the stroke without the corners of the slide colliding with each other.
With it being **completely flat on the back, this new variant of core is so much easier to configure into your mould design**. As a designer much more freedom is given when the mould is being developed, it can be as efficient and easy to maintain as possible.


DME is able to deliver these new S-Collapsible cores in **multiple variants, 6, 8 or 12 segments**, depending on your needs and diameter of the injected part.
If you are interested in this product, please contact our [customer service](https://dmeeu.com/contact)
team for more information or assistance with an order.




DME presents new Collapsible S-Cores

DME presents you a new product line – Precision Cutting Machines. Every tool shop can benefit from its own cut-to-length machine to make on site customisation so easy.

Every tool shop can benefit from its own cut-to-length machine to make on site customisation so easy. Our new ranges offer a wide range of cutter types., the basic robust solutions to more advanced technology based on your specific equipment needs.


You can check these new products on our eSTORE, where they are also avaiable to buy.


DME presents Precision Cutting Machines

We have added new date and QR inserts. Products are immediately available from our representatives and on our eSTORE.

We have added new date and QR inserts. **Products are immediately available from our representatives and on our eSTORE.**

DME Europe is ready to supply you with date inserts for 2022. Choose from a wide range of types and sizes. Explore all of them on our eSTORE and choose those which you find best for you, whether you need high temperature, multidaters or any other. **Selected items are available for a special price - special offer is valid for a limited time period.**

[Explore and buy on DME eSTORE](https://store.dme.net/date-stamps-inserts)

Introducing date stamps and inserts for 2022

We have introduced two unique solutions for moulding industry.

**Next to expanding our range of standard components in 2021**, we introduced two unique market changing solutions: Accualign Lifter and Premium Collapsible S-Cores.

[Accualing Lifters](https://www.dmeeu.com/page/23-dme-accualign-lifter-for-ejecting-difficult-undercuts) are our best lifters for ejecting parts with undercuts. They offer greatly improved reliability and deliver more options in mould design.

The breakthrough solution for molding undercuts is [Premium Collapsible S-Core](https://www.dmeeu.com/page/26-dme-s-core-premium-collapsible-cores). Collapsible S-Cores from DME deliver more options for mould design and faster cycle times for moulders. You can also mould more complex parts in one cycle than before.

**Both products are available exclusively from DME**. Feel free to contact your local DME representative if you have any questions about any product from our portfolio.

The best from 2021

More possibilities for building your moulds.

Mould Guiding solutions range is expanded with new types and sizes of ejection pins and sleeves, locating rings, shoulder screws, retainers for inclined pin or cotter with wear plate.

In components extension catalogue, you will find NEW:
- Guiding Units
- Ejection Units
- Interlocks
- Screws
- Pins, plugs and baffles for mould cooling systems

Get more options when designing your mould with broadened selection of DME mould components.

[Leaflet](https://dme-prod-uploads-51jro.fra1.cdn.digitaloceanspaces.com/Components_extension_4th_EN_b5cf4e3b1f.pdf)
[eSTORE](https://store.dme.net/new-components-extension-february-2022-1)

Components extension 1/2022

Europe’s most popular mould standard now by DME

Europe’s most popular standard now available - Introducing K-Series Plates from DME! 

To aid your design flexibility we have made a major addition to our drilled plates range with brand new K-Series plates. DME offers the full range of Europe's most preferred mould standard.  With around 1500 variants and a wide choice of steel grades we are ready to support any application.

Along with short lead times we have the widest range of components and accessories in the industry, DME proves once again to be your One-Stop-Shop of choice.

YOUR BENEFITS
- Modular system
- Top quality steel
- Maximum availability
- Flexibility of design
- High precision guiding elements

Check out the new K-Series on our [eSTORE](https://store.dme.net/k-series-euro).

[PDF Leaflet](https://dme-prod-uploads-51jro.fra1.cdn.digitaloceanspaces.com/lft_en_kseries_aae822ae45.pdf)


Introducing K-Series plates

Faster set up, more secure and convenient to use.

Remote Date Stamps make set up and control of the stamp setting easier, but also deliver reduced downtime and risk of damage to the cavity when operating the stamp. Making them a premium choice amongst the date stamps.

**Remote Date Stamps from DME feature:**
- External visibility of the date stamp setting
- Eliminates possible scratching to the cavity during stamp updating
- Included nut allows easy height adjustment to get the perfect visual appearance on the part

[Buy on eSTORE](https://store.dme.net/fr-remote-date-inserts)

Introducing Remote date stamps

DME is introducing a new range of standard cooling components that are well known and established at DME USA. They are of the highest quality as you have come to expect, with many benefits:
- Increased selection
- Fast deliveries
- Top Quality
- Great value

You can choose from a wide selection of types and sizes on our [eSTORE](https://store.dme.net/mould-cooling-dme-usa-system).

Introducing DME USA system

Remind yourself of our best new products from 2022

In 2022 we added many additions to the DME range, some small and some large, but all very important to show how we continue to expand our range. This makes thousands of new items overall, here we pick those we consider to be the most interesting for you.

We further increased our standard mould range by introducing new [K-Series](https://store.dme.net/k-series-euro), this range covers Europe's most preferred standard of drilled mould plates. A broad selection of standard sizes, steel types and a fast service - these are the main benefits of K-Series, which will bring you a significant boost in design and time flexibility when choosing DME.

For better plate control, we introduced [EZ-Latch Locks](https://www.dmeeu.com/page/68-dme-ez-latch), these external latch locks are a universal solution for mould plates control. They allow you to enhance your design options as well as reduce tooling costs, EZ-Latch Locks are ready to mount straight out of the box.

And don't forget [iControl](https://www.dmeeu.com/page/230-dme-i-control-hot-runner-insulation), our brand new solution for energy savings when using Hot Runner systems. Introduced recently, October 2022, it has already become a bestseller that allows you to save energy costs.



The best of 2022

Minimize thermal variation, reduce cycle time, cold spots and lower your energy requirements. Reach these benefits with iControl, a breakthrough solution for improving thermal management in your mould.

[Read More](https://www.dmeeu.com/page/230-dme-i-control-hot-runner-insulation)

iControl hot runner insulation

Top quality and performance is what you get with new ME Series and M2+ Series Temperature Controllers for hot runner systems.

Top quality and performance is what you get with new ME Series and M2+ Series Temperature Controllers for hot runner systems. Choose ME Series for top value applications in low to mid complex moulds or choose M2+ Series for the most demanding applications.


### Smart Series Me
The ME controller platform combines essential features with advanced APS Technology for precision hot runner temperature control. Powerful performance from a compact unit that helps improve part quality and minimize scrap. Optimize the performance of any hot runner system and unlock your operations full potential. ME Series is ideal for low to mid- complex moulds, it comes with excellent value and delivers reduction in time and energy demands for each cycle.
[Learn more](https://www.dmeeu.com/page/295-hot-runner-temperature-controller-me-series)


### Smart Series M2+
A fully featured controller platform with advanced capabilities for superior moulding performance. Well suited for tight process control on all co-injection applications, it is your best choice as a direct replacement for many existing outdated controller platforms.
[Learn more](https://www.dmeeu.com/page/296-hot-runner-temperature-controller-m2-plus-series)

Smart Series Temperature Controllers

The next generation stack mould plate control

The advanced patented design of the new DME Ball Screw Centering Device provides precise movement and reduced friction for a smooth open/close of your stack mould.

DME has deployed the same precise engineering concept used for years in CNC machining. This unit is easily custom fit to your application with off-the-shelf availability. A simple cut to length to the mould stack height and bolt on features allow for quick and easy installation with drastically reduced lead times. With up to 2 meters per second open rate, there will be no restrictions on cycle time.

[Learn more](https://www.dmeeu.com/page/297-dme-ez-stack-ball-screw-centering-device)

EZ Stack Ball Screw Centering Device

We are introducing hundreds of new items in this major component extension.

Our range of compression springs now includes round wire springs with load from light to very heavy. The range of guiding elements for the sliders is extended with standard Guiding stocks, Self-lubricated guiding stocks and Self lubricated slide plates.

New solutions for connection between sliders and hydraulic cylinder such as Coupling set for hydraulic cylinder or separately Coupling pin for hydraulic cylinder and Counter piece for coupling pin are now available. In addition we have implemented Shims for installation in parting line in Round and Rectangular shapes. For safe manipulation with the mold you can choose our newly added Tool safety device or part of adjustable lifting device Distance bolt. To solve the cable management on molds we have introduced Cable retainers.

Further, for fixation of cavity and core insert in frames we are delivering Position wedges in wide range of dimensions. Two new types of our Linear ball bearings for ejection packets provide you more options in mold design. Cooling range expanded to include Extensions pipe with thread. Our portfolio of retainers is also extended with Spring-loaded locking screw with higher spring force.

[Buy in eSTORE](https://store.dme.net/new-components-extension-march-2023?utm_source=dmeeu&utm_medium=referraleu)

Components Extension March 2023

Find everything from our MRO portfolio at a glance. Enhanced with the new products and solutions for your toolroom, DME WORKSHOP EQUIPMENT catalogue is an industry must have. Providing all you need for maintenance, polishing and process control.

[To the catalogue](https://www.dmeeu.com/dme-files/catalogues-flip/MRO-EN/DME-Workshop-Equipment-Catalogue-2023-EN.html#p=1)

Workshop Equipment Catalogue

Available in a wide range of sizes and steel types

Steel bars are an important addition to our range as they are essential when you need steel material at a predefined size to use in the mould you are working on.

Select from different sizes, save material & reduce waste this will help lower the number of tasks you need to perform in your toolshop.

[Buy in eSTORE](https://store.dme.net/flat-and-round-steel-bars-eu?utm_source=dmeeu&utm_medium=referraleu&utm_campaign=news-article&utm_content=bars)

Round and Flat Steel Bars

The world‘s first fully integrated vario system.

The world‘s first fully integrated vario system Variotherm brings you an optimized way of heat exchange in your mould. With Variotherm, you can save a considerable amount of energy and speed up the whole process at the same time.

**Variotherm key benefits:**
- reducing cycle time
- improving parts quality
- reducing energy consumption
- lowering maintenance costs
- digital connectivity

Variotherm is compatible with any mould cooling/heating application, but delivers the best results with conformally cooled moulds.

[Learn more](https://www.dmeeu.com/page/324-variotherm-technology)

Variotherm technology

We have added new date and QR inserts. **Products are immediately available from our representatives and on our eSTORE.**

DME Europe is ready to supply you with date inserts for 2024. Choose from a wide range of types and sizes. Explore all of them on our eSTORE and choose those which you find best for you, whether you need high temperature, multidaters or any other. **Selected items are available for a special price - special offer is valid for a limited time period.**

[Explore and buy on DME eSTORE](https://store.dme.net/date-stamps-inserts?utm_source=dmeeu&utm_medium=referraleu)
[Promo leaflet](https://dme-prod-uploads-51jro.fra1.cdn.digitaloceanspaces.com/lft_en_ds24promo_eur_d904e9bfef.pdf)

Promo - 2024 date stamps and inserts

Made from high-grade stress-relieved steel, our plates ensure reliable quality even for your most demanding projects. Our standard sizes offer exceptional value and a broad range of steels to meet your specific needs.

Moreover, they perfectly match with DME's high precision components, ensuring seamless integration and superior performance.

Choose DME's K and F series, Europe most popular mould standards, for quality and efficiency.

We have significantly improved our K and F standard drilled plates offer

Highly Economical Standardized System For Simple Commodity Applications

We are pleased to announce the availability of the EcoONE-Series hot runner system, a 1-8 drop configurable manifold system with rapid lead times.

A highly economical solution suitable for processing commodity resins for simple, cost sensitive applications such as consumer goods, small home appliances, basic automotive components, electronic peripherals/accessories and more.

[Learn More](https://www.dmeeu.com/page/403-eco-one-series-standardized-hot-runner-melt-delivery-system)

EcoONE-Series - hot runner melt delivery system

The next evolution of DME hot runner solutions

StellarONE **combines the best of DME's legacy systems with today's hot runner technology**. Available in both thermal and valve gate configurations, six flow paths and several gate options, the modular StellarONE is an incredibly flexible and competent hot runner system supporting a very wide range of resins, including many complex engineering resins.

StellarONE is a true global platform, with service and component availability in Europe, North America and Asia. **Designed to compete with advanced systems yet reasonably priced.**

**Main benefits:**
- precision temperature
- more processing control
- extreme durability
- global support

[Learn more](https://www.dmeeu.com/page/402-stellar-one-hot-runner-melt-delivery-system)

Introducing StellarONE

DME Dura Core is a solution delivering lower costs while retaining the high performance of DME S-Core in most applications.

DURA CORE is an innovative collapsible core design: a groundbreaking two-piece spring collapsible core designed for precision and longevity. This advanced collapsible core features a unique sequential collapse mechanism, where the larger and smaller segments operate independently. This distinct design ensures stress-free movement of the smaller segments, significantly enhancing the lifespan of the DURA CORE.

**Main benefits:**
- Sequential Opening
- Two-Piece Design
- Compact Safety Ring
- Straight Core Pin Use
- Minimized Core Length

[Read More](https://www.dmeeu.com/page/425-dme-dura-core-spring-collapsible-core)

Dura Core - Collapsible Core

We are expanding our range of flat ejector pins, adding over 1900 new sizes across FK, FW, F2R, and F4R types and also 7 new categories.

New and enhanced flat ejector pins categories:
- FK - hardened flat ejector pin - new sizes added
- FW - nitrided flat ejector pin - new sizes added
- F2R - flat ejector pin with 2 radii - new sizes added
- F4R - flat ejector pin with 4 radii - new sizes added
- F2RC - F2R design with DLC coating (NEW)
- F4RC - F4R design with DLC coating (NEW)
- F2RL - flat ejector pin with 2 radii and long blade (NEW)
- F4RL - flat ejector pin with 4 radii and long blade (NEW)
- F2RLC - flat ejector pin with 2 radii and long blade and DLC coating (NEW)
- F4RLC - flat ejector pin with 4 radii and long blade and DLC coating (NEW)
- FKLB - hardened flat ejector pin with long blade (NEW)

This expansion is part of our ongoing commitment to providing you with the most comprehensive selection of components in the industry.

[Buy in eSTORE](https://store.dme.net/mould-ejection?utm_source=dmeeu&utm_medium=referral)

New flat ejector pins

We have added new date and QR inserts. **Products are immediately available from our representatives and on our eSTORE.**

DME Europe is ready to supply you with date inserts for 2025. Choose from a wide range of types and sizes. Explore all of them on our eSTORE and choose those which you find best for you, whether you need high temperature, multidaters or any other. Selected items are available for a special price - special offer is valid for a limited time period.

[Explore and buy on DME eSTORE](https://store.dme.net/date-stamps-inserts?utm_source=dmeeu&utm_medium=referral)

[Promo leaflet](https://dme-prod-uploads-51jro.fra1.cdn.digitaloceanspaces.com/lft_en_ds25promo_824ef59ee2.pdf)

Promo - 2025 date stamps and inserts

Take advantage of a limited-time offer from DME Europe

Take advantage of a limited-time offer from DME Europe. We're offering a special 15% discount on our entire range of Workshop Equipment (excluding the CleanCare devices). Promo prices are valid both online and when ordering through our sales teams.

[More information here](https://store.dme.net/save-now-on-workshop-equipment#)


Save now on Workshop Equipment (MRO)

Automatic Date Stamps, operated by pressurized air, can change position after every part ejection, enabling the tracking of each individual part.

This reliable and easy-to-implement solution enhances your ability to seize opportunities from customers and industries that demand maximum traceability of part manufacturing history.

[Order online here](https://store.dme.net/ads-automatic-date-stamps-eu)

Automatic Date Stamps

High quality and wide selection from an acclaimed manufacturer

VEGA has decades of experience & offers an incredible range of hydraulic cylinders in various configurations that can accommodate almost any moulder's requirements.

From now on, you can find these hydraulic cylinders in the DME offering. You can easily find and order the type of cylinder you need in your desired dimensions. For almost all types, selected dimensions can be customized, while a vast range of standard sizes is also available.

[More Information](https://www.dmeeu.com/page/495-hydraulic-cylinders-dme-by-vega)

Hydraulic Cylinders DME by VEGA

'Flat Die Unit' (FDU) offers a unique approach to nozzle outlet geometry. This innovative design allows for the injection of more material while reducing the holding pressure time. This results in shorter cycle times and minimal part degradation (or their complete elimination) during injection moulding, such as jetting and shearing.

The FDU is a proven technology that enhances your capabilities, especially for more demanding projects. Take advantage of it now by contacting your DME representative for a non-binding consultation, or learn more on our website.

[Learn More](https://www.dmeeu.com/page/496-fdu-hrs-nozzles)

Introducing FDU HRS

EXAflow gate inserts are standardized components designed for tunnel and rear surface gating applications in plastic injection moulding.

EXAflow gate inserts are standardized components designed for tunnel and rear surface gating applications in plastic injection moulding.

Offered in a variety of types and designs with various gate diameters, these products meet a wide range of requirements.

By using our gate inserts, you can save time and reduce costs, eliminating the need to create your own sprue gating systems.

[More Information](https://cdn.dmeeu.com/lft_en_exaflow_b7321866b9.pdf)

EXAflow - High Precision Tunnel Gate Inserts

New high-temperature version and other new types and sizes of hoses are now available

New high-temperature version and other new types and sizes of hoses are now available. Ordering is possible via your DME representative or online on our e-commerce platform.

Next to hoses, we offer a wide range of coolling connectors in several European standards. Hundreds of types and sizes in stock!

[Buy Online](https://store.dme.net/mould-cooling-hoses-eu?utm_source=dmeeu&utm_medium=referraleu)

Hoses

Now available with exclusive commercial benefits

Save on top quality Workshop Equipment from DME. Our tools, devices and consumables deliver high efficiency while preserving excellent cost efficiency. In DME, we have decades of experience and close cooperation with moulders across the globe.

**CleanCare for cooling channels maintenance** - our proven device for the maintenance of water circulation channels in your moulds and injection moulding machines. It effectively removes rust, limescale, and other deposits, delivering excellent results - **NOW 10% OFF, including consumables**.

**Chemical agents and purging compounds - including FreshStart**, a proven compound for fast material changes and purging residues from your injection machines and moulds - **NOW 15% OFF**.

Benefit from using DME Workshop Equipment, now for a better price.

For more info [contact](https://www.dmeeu.com/en/contact) your Field Sales or Customer Service Agent.

PROMO - Workshop Equipment

Mastering Plate Motion with DME EZ-Latch Locks and Reverse EZ-Latch Locks

Unlock the full potential of your mould plate sequencing and control with DME’s innovative EZ-Latch and Reverse EZ-Latch (R-EZ) Lock systems.
 
Join Jeremy Sutch, DME's Director of Engineering, and other experts for a hands-on, in-depth webinar covering. 

**Register now and learn more about:** 
- The fundamentals of DME EZ-Latch, R-EZ-Latch, and R-EZ L Stripper and Ejector Plate Control systems, with real-world examples for 2-stage and 3-plate moulds.

- Step-by-step assembly instructions for each latch lock system to ensure precise and reliable plate control.

- Video demonstrations of key product features and typical use cases.

- A live walkthrough of the DME EZ-Latch Configurator, including configuration and troubleshooting tips.

- Real-time CAD file configuration: Submit your mold CAD files in advance or during the session for a personalized demonstration.

Whether you’re dealing with complex undercuts, multi-stage ejection, or advanced stripper plate setups, this session will help you optimize plate motion and action in your moulds with DME’s EZ Latch products.

Don’t miss your chance to interact with DME experts and see your own mould designs configured live! 🤝

**Tuesday, June 24 / 4 PM CEST**

**REGISTER NOW:**
https://register.gotowebinar.com/register/5780710315818452822?source=dmeeu

Webinar - Controlling the Action with DME EZ-Latch Locks

Join DME and Bryon Wolff from Fresh Start Polymer Solutions for an in-depth webinar

Join DME and Bryon Wolff from Fresh Start Polymer Solutions for an in-depth webinar designed to help injection moulders achieve improved financial performance and operational excellence through the implementation of a successful purging program.

**Register here:**
https://register.gotowebinar.com/register/2440244457053659228?source=dmeeu

This session will explore:

☑️ The Eight Steps to Achieving Value:  A structured approach to maximizing ROI, including understanding your process, grade selection, cost analysis, changeovers, preventative purging, shutdown/sealing, overall ROI assessment, and real-world case studies.

☑️ Assessing Improvement: Learn how to establish a standard rubric, create baselines, evaluate alternative systems, and determine the best value proposition for your business.

☑️ Impact on Key Metrics: Discover how Fresh Start purging compounds can improve product quality, accelerate changeovers, decrease scrap rates, lower production costs, and reduce machine downtime—ultimately boosting profitability and capacity.

☑️ Engineering Principles: Understand the science behind effective purging, including the role of turbulent flow and Reynolds number in cleaning, and how these principles lead to more efficient removal of contaminants and colorants.

☑️ Case Studies & Real Results:: Hear real-world examples demonstrating dramatic reductions in downtime (from hours to minutes), significant cost savings, and improved machine utilization—sometimes equating to the purchase of additional moulding machines without the capital expense.

☑️ Practical Guidance: Tips for troubleshooting common challenges, optimizing purging for recycled materials, and tailoring solutions for difficult color changes or high-wear applications.

Whether you’re looking to reduce costs, improve quality, or increase throughput, this webinar will provide actionable insights and proven strategies to help your operation strive for perfection with Fresh Start and DME.

**Who Should Attend:**
Plant managers, process engineers, maintenance teams, and anyone involved in injection moulding operations seeking to optimize their purging process and maximize value.

**Tuesday, July 29, 2025 4:00 PM - 5:00 PM CEST**

Webinar - Unlocking Value with Fresh Start Purging Solutions for Injection Moulding

Equip yourself for 2026 - now for better prices

DME Europe is ready to supply you with date stamps for 2026. Choose from a wide range of types and sizes. Explore all of them on our eSTORE and choose those which you find best for you, whether you need high temperature, multidaters or any other. Selected items are available for a special price - special offer is valid for a limited time period.

[Explore and buy on DME eSTORE](https://store.dme.net/date-stamps-inserts?utm_source=dmeeu&utm_medium=referral)

[Promo leaflet](https://cdn.dmeeu.com/lft_en_ds26promo_2e4aa10ec3.pdf)

Promo - 2026 date stamps and inserts

Our new Water Manifolds are engineered for optimal heat exchange and robust performance. Available in aluminium or stainless steel, they support:
- 4 to 10 cooling channels
- Working pressures up to 15 bar
- Temperature range: -20°C to +200°C

Customize your setup with various configurations, hose connections, and colour coding to match your toolshop standards.

[Buy Online](https://store.dme.net/shop-parts?catid=95_17399)

New High Performance Water Manifolds

We are expanding our range of materials for mould clamping

Mould Clamps represent an important component on which relies the whole process of fitting and mounting a mould into an injection machine. We are adding

• Clamping bars
• Clamp support components
• Several types of nuts (including DIN)
...and more

With this enhanced range of our mould clamps, we are ready to supply you with various types and sizes. You can expect the DME high quality and fast deliveries across Europe.

[Buy Online](https://store.dme.net/mcl-mould-clamps-eu?utm_source=dmeeu&utm_medium=referral)

New Mould Clamps

Prodotti nel nostro eSTORE

Prodotti

thumbnail_img-icon-services.png

img-icon-services.png

large_img-estore-visual.jpg

medium_img-estore-visual.jpg

small_img-estore-visual.jpg

thumbnail_img-estore-visual.jpg

img-estore-visual.jpg

estore-mould_bases_plates.svg

DME offre una gamma completa di piastre portastampi e basi di stampi standard e speciali. Qui trovate tutte le informazioni necessarie.

Basi di stampo e piastre

Mould Bases and Plates

Formy & Desky - Standardní i customizované | Normalien

Bases de moule et plaques

Formaszerszám-alapok és -lemezek

Bases y placas de moldes

Formen & Platten

Matrijshuizen en platen

Korpusy form i płyty

thumbnail_img-icon-plates1.png

img-icon-plates1.png

estore-mould_components.svg

I nostri prodotti continuano a definire gli standard più elevati del settore nella tecnologia degli utensili, rispetto ai quali tutti gli altri si devono misurare.

Con i componenti per stampi di DME otterrete qualità elevata, disponibilità in tempi brevi e un'ampia gamma di tipi e materiali. La nostra offerta di componenti per stampi copre praticamente tutti i possibili componenti di cui ogni stampatore può avere bisogno. Visitate il mostro eSTORE per saperne di più sulla gamma di componenti DME standard.

Componenti di stampo

Mould Components

Komponenty Forem | Standardní i na zakázku | Normalien

Komponenty form

Composants de moule

Formaszerszám-tartozékok

Componentes de moldes

Komponenten

Matrijsonderdelen

thumbnail_img-icon-components1.png

img-icon-components1.png

estore-industrial_supplies.svg

C’è bisogno di più per gestire la propria officina, costruire stampi e far girare i propri macchinari.

Forniture industriali

Workshop Equipment

Suministros industriales

Ipari ellátás

Przemysłowe materiały eksploatacyjne

Werkstattbedarf

Dílenské potřeby

 Industriële verbruiksgoederen

thumbnail_img-icon-mro1.png

img-icon-mro1.png

estore-hot_runners.svg

Canali caldi e controller

estore-die_sets.svg

Una gamma completa di piastre, blocchi stampo, set di fermi, punzoni e altri componenti dello stampo esalta la vostra produttività in diversi modi.

Set di stampi

Die Sets

Stanzwerkzeuge

Stempelhuizen/Stansvormen

Formaszerszám (présszerszám) készletek

Zestawy matryc

Juegos de matrices

Jeux de matrices

Střižné nástroje

thumbnail_img-icon-dies1.png

img-icon-dies1.png

estore-polishing.svg

Il processo di finitura di superficie richiede l'impiego di vari utensili e materiali. Possiamo offrirvi tutto l'occorrente, dalla sgrossatura alla lucidatura fine, per matrici e utensili per lo stampaggio e la pressofusione.

Levigatura

Polishing

Polerowanie

Pulido

Oberflächebearbeitung

Polissage

Polijsten

Leštění

Polírozás

thumbnail_img-icon-polishing1.png

img-icon-polishing1.png

Products in our eSTORE

Produits dans notre boutique en ligne

Producten in onze eSTORE

Productos de nuestra tienda en línea

Produkty v našem eSTORE

Produkty w naszym sklepie eSTORE

Online áruházunk termékkínálata

Az elkövetkező hónapokban 3 vásáron veszünk részt

A DME arra törekszik, hogy közel maradjon ügyfeleihez, és szeretnénk Önnek kényelmesebbé tenni legújabb és legkelendőbb megoldásaink megtekintését. Izgatottak vagyunk, hogy a következő 2 hónapban 3 vásáron lehetünk jelen 3 országban.

Kezdjük a **Kunstoffenbeurs**-szel Hertogenboschban, **Hollandiában**, ahol szeptember 20. és 21. között találkozhat szakértőinkkel.

A következő az **MSV** lesz a **csehországi Brünnben** (Brno), amelyre október 10-től 13-ig kerül sor.

Nem hagyhatjuk ki a **németországi Fakumát** sem, amely már többször is remek alkalomnak bizonyult a személyes találkozásra. A Fakuma október 17. és 21. között kerül megrendezésre.

Nagyon várjuk, hogy részt vehessünk ezeken az eseményeken, és reméljük, hogy találkozunk valamelyiken!

Találkozzunk Hollandiában, Németországban vagy Csehországban!

W najbliższych miesiącach weźmiemy udział w 3 imprezach targowych

Firma DME utrzymuje ścisłe kontakty z klientami, aby zapewnić im wygodny dostęp do najnowszych i najlepiej sprzedających się rozwiązań. Z podekscytowanie czekamy na wzięcie udziału w 3 imprezach targowych w 3 krajach w ciągu najbliższych 2 miesięcy.

Rozpoczynamy od **Kunstoffenbeurs** w Hertogenbosch **w Holandii**, gdzie będzie można spotkać naszych ekspertów 20 i 21 września.

Następnie będziemy dostępni na targach **MSV** w Brnie **w Czechach** od 10 do 13 października.

Nie możemy też przegapić targów **Fakuma w Niemczech**, które były zawsze doskonałą okazją do spotkania z klientami. Targi Fakuma będą miały miejsce w dniach 17–21 października.

Z niecierpliwością czekamy na te wydarzenia i mamy nadzieję, że się na nich spotkamy!

Spotkajmy się w Holandii, Niemczech i Czechach!

V nadcházejících měsících se účastníme 3 veletrhů

V DME děláme maximum pro to, abychom byli stále nablízku našim zákazníkům, a využíváme každou vhodnou příležitost k tomu, abychom jim usnadnili seznámení s našimi nejnovějšími a nejúspěšnějšími řešeními. Proto s radostí oznamujeme, že v příštích 2 měsících budeme přítomni na 3 veletrzích pořádaných ve 3 zemích.

Začínáme veletrhem **Kunstoffenbeurs** pořádaným **v nizozemském městě Hertogenbosch**, kde se s našimi odborníky budete moci setkat ve dnech 20. až 21. září.

Další akcí je veletrh **MSV**, který se koná v Brně, **Česká republika** od 10. do 13. října.

Vynechat nemůžeme ani veletrh **Fakuma** pořádaný **v Německu**, který se již opakovaně osvědčil jako skvělá příležitost pro vzájemné setkání. Veletrh Fakuma se bude konat od 17. do 21. října.

Na svoji účast na těchto akcích se opravdu těšíme a doufáme, že na jedné z nich se uvidíme také s vámi!

Setkejte se s námi v Nizozemsku, Německu nebo České republice

We nemen de komende maanden deel aan 3 handelsbeurzen

DME streeft ernaar dicht bij zijn klanten te blijven en we willen het u gemakkelijk maken om onze nieuwste en best verkopende oplossingen te zien. We ontmoeten u graag op 3 beurzen in 3 landen in de komende 2 maanden.

We beginnen met de **Kunstoffenbeurs** in 's Hertogenbosch, **Nederland**, waar je onze experts kunt ontmoeten van 20 tot 21 september.

De volgende is **MSV** in Brno, **Tsjechië**, die plaatsvindt van 10 tot 13 oktober.

We mogen de **Fakuma** in **Duitsland** niet missen, die herhaaldelijk een geweldige gelegenheid voor ons is gebleken om u daar te ontmoeten. Fakuma vindt plaats van 17 tot 21 oktober.

We kijken er erg naar uit om deze evenementen bij te wonen en hopen u op een van deze evenementen te zien!

Ontmoet ons in Nederland, Duitsland of Tsjechië!

Vamos a asistir a tres ferias comerciales en los próximos meses

En DME, hacemos todo lo posible por permanecer cerca de nuestros clientes y, por eso, le facilitamos la visita a nuestras soluciones más novedosas y éxitos de ventas. Estamos encantados con la presentación en tres ferias comerciales en tres países distintos en los dos próximos meses.

Empezamos por **Kunstoffenbeurs** en Hertogenbosch, **Países Bajos**, donde podrá visitar a nuestros expertos los días 20 y 21 de septiembre.

La próxima cita es **MSV** en Brno, **República Checa**, del 10 al 13 de octubre.

Y no podemos perdernos **Fakuma** en **Alemania**, donde ya nos hemos podido ver en varias ocasiones y que se celebra del 17 al 21 de octubre.

Estamos desando asistir a estos eventos y esperamos verle en alguno de ellos.

Visítenos en Países Bajos, Alemania o República Checa

We are attending 3 trade fairs in the upcoming months

DME strives to stay close its customers and we want to make it convenient for you to see our newest and best-selling solutions. We are excited to be present at 3 trade fairs in 3 countries in the next 2 monhts.

We begin with **Kunstoffenbeurs** in Hertogenbosch, **Netherlands**, where you can meet our experts from September 20 to 21.

The next is **MSV** in Brno, **Czechia**, which takes place in October 10 to 13.

We cannot miss **Fakuma** in **Germany**, which has repeatedly proven to be a great opportunity for us to meet you there. Fakuma takes place in October 17 to 21.

We are really looking forward to attending these events and hope we will see you at one of them!si

Meet us in Netherland, Germany or Czechia!

Wir werden in den kommenden Monaten an 3 Messen teilnehmen

DME möchte seinen Kunden nahe sein – und wir möchten es bequem für Sie machen, unsere neuesten und meistverkauften Lösungen zu sehen. Wir freuen uns darauf, in den nächsten 2 Monaten auf 3 Messen in 3 Ländern vertreten zu sein.

Den Anfang macht die **Kunstoffenbeurs** in ’s-Hertogenbosch, **Niederlande**, wo Sie vom 20. bis 21. September unsere Experten treffen können.

Dann folgt die **MSV** in Brno, **Tschechien**, die vom 10. bis zum 13. Oktober stattfindet.

Wir wollen auch die **Fakuma** in Friedrichshafen, **Deutschland** nicht verpassen, die sich für uns immer wieder als eine großartige Gelegenheit für Treffen mit unseren Kunden erwiesen hat. Die Fakuma findet vom 17. bis 21. Oktober statt.

Wir freuen uns sehr auf diese Veranstaltungen und hoffen, dass wir Sie auf einer davon sehen werden!

Treffen Sie uns in den Niederlanden, Deutschland oder der Tschechischen Republik!

Meet us in Netherlands, Germany or Czechia!

Nei prossimi mesi saremo presenti a tre fiere

DME si prodiga per rimanere al fianco dei propri clienti e desidera rendervi più agevole la visione delle nostre soluzioni più recenti e più vendute. Siamo entusiasti di presenziare a tre fiere di settore che si terranno in tre Paesi nei prossimi due mesi.

Inizieremo con **Kunstoffenbeurs** a Hertogenbosch, nei **Paesi Bassi**, dove avrete modo di incontrare i nostri esperti il 20 e il 21 settembre.

Poi sarà la volta di **MSV** a Brno, in **Repubblica Ceca**, che si terrà dal 10 al 13 ottobre.
​
Infine, non potremo di certo mancare a **Fakuma**, in **Germania**, che si è rivelata ripetutamente un'ottima occasione per incontrarvi. Fakuma si terrà dal 17 al 21 ottobre.

Non vediamo l'ora di partecipare a questi eventi e ci auguriamo di potervi incontrare ad uno di essi!

Prodotti

Nuovi prodotti

Utilizzate il Solution Finder di DME per trovare esattamente il prodotto che vi serve

Ordini online 24/7

Rimanete aggiornati

Società

Soluzioni

Prodotti

Risorse

Altro

Prodotti

Nuovi prodotti

Utilizzate il Solution Finder di DME per trovare esattamente il prodotto che vi serve

Ordini online 24/7

Rimanete aggiornati

Società.css-1o6uc2o{width:1.25rem;height:2px;background-color:#0081c3;display:none;margin-top:0.5rem;}@media (min-width: 768px){.css-1o6uc2o{display:block;}}

Soluzioni

Prodotti

Risorse

Altro

Società